Adaptors.

Adaptor


Unscrew the 1 1/4" eyepiece holder and replace with this
adaptor to give male T thread fitting which allows direct fitting
of cameras and other standard accessories to the ouput side of the Quark


Larger photo of adaptor   Click


Example uses.

Adaptor


Many H-Alpha imaging configurations suffer from Newton Rings or interference
fringes caused by the flat optical surfaces in the imaging train.
If the camera is set at an angle to the optical axis the interference pattens can be eliminated.

The tilt adaptor incorporates a spherical joint between the 2 flanges:-
This prevents light from entering the optical path as do other 2 flange adaptors.
And since the centre of rotation of the joint is designed to be close to the
surface of the chip,the camera remains on or very close to the optical centre when tilted .
The adaptor can be set from 0-8 degrees of tilt.


The adaptor has a female T-thread on the front side and a Male T-thread on the camera side.

Larger photo of adaptor   Click


Tilt Adaptor.




Front to back flange distance 22.8mm